The SpaceWire BOB is thought to help the operators to acquire with probes the signals for a fast debugging at electrical and protocol level.

One side of the BOB shall be directly connected to the Unit Under Test, the other side shall be connected to the cable. Both connectors are Socket

• 9pin microD  BoB
• High Quality Connectors
• Signal routing is done on PCB
• 100 Ohm impedance line
• Matched pairs < 5mm
• Shield separated from ground
• Test points
• Cross Talk coeff  <-30dB
• Tested accordin to:   ECSS-E-ST-50-12C clause 5